Credo of Switzerland have announced that they will show their new speaker model, The Cinema LTM at HIGH END 2019.
After a world-premier at AXPONA, they will now present the speaker in the “Van den Hul” room Atrium 4.2 – room F 207.
System
Turntable: VPI Industries Avenger plus
Tonearm: VPI Fatboy
Cartridge: Van den Hul – Black Crimson
Cartridge: Van den Hul – The Colibri Master Signature
DAC: EMM Labs DAC2X
Phono pre: Van den Hul – The Grail SE
Preamp: Van den Hul – The Emerald
Power amp: Van den Hul – The Excalibur
Wiring: All Van den Hul cables
Mains Filter: Van den Hul – The Black Hole
Two speaker brands in one room
Technical specifications (further technical explanations below):
- Three way floor-standing speakers
- Line Array Enclosures: Sealed, mid-woofer & tweeter separated (optimized for low-compression)
- Subwoofer: Sealed (optimized for low-compression)
- Vibration-decoupled to the ground
- Tweeter: 32 x 22 mm coated textile dome, neodymium magnet
- Midwoofer: 14 x 4″ fiber-glass cone (coated), neodymium magnet, low-loss suspension & drive
- Subwoofer: 4 x 12 “aluminum cone, double ferrite magnet, 60 mm stroke
- Crossover: Passive proprietary 3-way filters, coils: Mundorf CFC air-core, capacitors: Mundorf MCap Supreme EVO
- Crossovers are mounted vibration-decoupled
- Handmade by Credo Audio Switzerland
- Tuning: Closed (optimized for low-compression)
- Frequency response: 16 Hz – 20 kHz, +/- 2.5dB
- Bass roll-off: 20 Hz @ 0dB / 15 Hz @ -2.5dB / 14 Hz @ -10dB
- Efficiency: 85.5 dB @ 2.83V @ 1kHz @ 1m
- Linear impedance: nominal 8 ohms, minimum 3.8 ohms at 10 kHz, max 9.1 ohms @ 200 Hz
- Recommended amplifier power: For 95 dB at 1 m distance: 18 W
- Recommended amplifier power: For 95 dB at 4 m distance: 100 – 300 W RMS
- Weight: 155 kg (342 lb.) p.p. without packing
- Size: (H x D x W): 187 cm x 70 cm x 27 cm (73.6 x 27.5 x 10.6″) incl. isolation feet
Includes brushed stainless-steel feet.
You must be logged in to leave a reply.