10. August 2021 · Comments Off on Exposure 3510 Integrated Amplifier · Categories: Hifi News · Tags: , , , , ,


Over the past few years, Exposure has concentrated its attention on its XM series of components. Now, the British HiFi brand is turning its focus back to its upper-end series, starting with the just-launched Exposure 3510 integrated amplifier.

The new Exposure 3510 series is packed with trickle-down technology from Exposure’s top-of-range 5010 series. First in the series is the Exposure 3510 integrated amplifier which replaces and improves upon the 3010S2D of the outgoing 3010 series.

Exposure 3510 Integrated Amplifier

Exposure 3510 Integrated Amplifier


The Exposure 3510 Integrated Amplifier delivers 110W RMS per channel into 8 Ohms and features six line inputs, with the option to fit an MC or MM phono module, or a plug-in DAC.

Outputs include bi-wiring compatible speaker outputs, a separate preamplifier output for bi-amping or for use with a separate power amplifier, and a headphone output. On the AV input, there is a choice of fixed or variable gain, allowing configuration as either a regular stereo input or a fixed gain home cinema input.

Exposure 3510 Integrated Amplifier

Exposure 3510 Integrated Amplifier rear panel


The 3510’s newly redesigned power amplification section draws on Exposure’s flagship 5010 monoblocks to deliver enhanced linearity and lower distortion at high power output, and with extra smoothing added to the power supply.


The preamp section, meanwhile, features all discrete transistors in the gain stage with a hybrid power supply circuit designed to ensure very low noise on the supply rails to the gain stage. Input switching and volume tracking of the PCB have been further optimised for less crosstalk.

Exposure 3510 Integrated Amplifier

Exposure 3510 Integrated Amplifier in Titanium finish


Power output (stereo) 110W per channel at 1kHz into 8 Ohms

Inputs (line) Impedance 17K Ohms minimum

Sensitivity 250mV

Power consumption <400W, 8 Ohms load, both channels driven

Dimensions 440mm (w) x 300mm (d) x 115mm (h)

Weight Gross 14kg / Net 12kg


Pre-amplifier output 1.9V for rated input (gain +18dB full volume)

Maximum output 7.7V RMS @ 1kHz

Frequency response 20Hz – 20kHz ± 0.5dB

Total harmonic distortion <0.03% at rated output, ref. 1kHz

Signal to noise ratio >100dB, ref. rated output

Channel separation >60dB, 20Hz – 20kHz


Output impedance <12 Ohms at 1kHz

Max. level into 33 Ohms at 1kHz & 0.05% THD 4.8V RMS, (700mW)

Total Harmonic Distortion at 2V output 1kHz <0.02%, (120mW)

Max. level into 330 Ohms at 1kHz & 0.02% THD 7V RMS (150mW)

Total Harmonic Distortion at 2V output 1kHz <0.015%, (12mW)


The Exposure 3510 integrated amplifier is available now, priced at £2,250 (incl. VAT): In Black or Titanium finish.

Get all the latest Hifi News with Hifi Pig here!

Read More Posts Like This

  • BAT VK80I INTEGRATED AMPLIFIER UNVEILED Wilmington, Delaware, based Balanced Audio Technology (BAT) has released their all-tube integrated amp the BAT VK80i Integrated Amplifier Distributor Karma-AV is bringing the BAT VK80i to the UK. Incorporating technological advances first introduced by the brand’s flagship REX series, the long-awaited BAT VK80i all-tube integrated amplifier features specifically the triode-balanced architecture, fuse-less protection and automatic-bias…

  • Copland CSA150 Integrated Amplifier

    The Copland CSA150 integrated amplifier is the top model in the new line of Danish brand Copland's CSA series amplifiers. Copland CSA150 Integrated Amplifier The new Copland CSA150 Integrated Amplifier employs the Copland double triode gain stage with MOS-FET buffering ensuring a tight interface between the tube and the solid-state parts of the amplifier. The Copland CSA150 Integrated Amplifier claims…

  • Rogers E40Aii LE Integrated Amplifier

    ROGERS E40AII LE INTEGRATED AMPLIFIER LAUNCHED AS A LIMITED EDITION Only ten units will be available of this piece of audiophile history as Rogers announces a strictly-limited edition of the Rogers E40AiiLE integrated amplifier. While working at Audio Note, Rogers' Head of Design unearthed a handful of chassis transformers and PCB’s for this amplifier. "They were just sitting in AudioNote’s…

Comments closed.