Merrill Audio Advanced Technology Labs, LLC announce the gold series Christine Reference Preamplifier

See it at the World Premiere at T.H.E Show 2016, California, Room 1417.ChristineFrontMA1027

“The Christine Reference Pre-amplifier is built with the finest components and attention to every detail like never before. Hand routed PCB layout of each trace, the placement of the trace, the length of the trace, the multistage power supplies, the selection and matching of the finest components, balanced configuration, isolation of power, all hand soldered connections, Silver plated pure copper wire with Teflon sleeving are only some of the engineering that make the Christine Reference Pre-amplifier so special.  Each unit is hand built and tested from the board level up to the finished unit. An external AC/DC Power supply unit ensures very quiet operations. The multistage power supply is so good, that power cords do not make a difference and the unit is impervious to noise on the AC line. ”

Specifications:

Frequency Response: to 800kHz 0.1db, 1.5MHz -3db

S/N:  110db

THD: 0.003%

Volume control:  -84db to +26db, 0.5dB steps, -84db attenuation, +26dB gain

Pre-set Gain range:  +/- 12db

Maximum volume and Minimum Volume Setting Range: 0 to 115db.

Input voltage Max:    +/- 10 Volts

Output Voltage Max: +/- 12 Volts

Inputs:   4 Balanced inputs

Outputs: 2 Balanced Outputs

Remote Trigger at 12 Volts, 20mA.

External Power Supply that is double fused.

1.25 inch White LED display.

Absolute Polarity selection: 0, 180

 

 

Read More Posts Like This

  • Clones Audio Announce Phonostage

    Clones Audio have announced their first phonostage, the PA1. It's a two box unit with internally adjustable DIP switches and has cartridge loadings of 33, 100 1K and 47 Kohms so should be suitable for most MM and MC cartridges. There is a selectable gain of 48dB, 52dB, 63, dB, 70dB and 74dB and it's available in either 115V or…

  • Audio Research Announce SP20 Preamplifier

    Audio Research has announced the new SP20 vacuum-tube preamplifier which the company say is influenced by some of their classic SP preamplifiers but with performance that is only achievable their best LS- and PH-series. The front panel has a new 4.3″ LCD touchscreen, with two large rotary knobs on either side. For the first time ever on an Audio Research…

  • Bespoke Audio Passive Preamplifier

    At £9000 the Bespoke Audio Co passive Preamplifier certainly isn’t cheap, but this is a hand-made in the UK, luxury product that is not meant to be within the reach of the majority of people. Stuart Smith takes a listen. "You can choose the configuration of your preamplifier to satisfy your needs and in collaboration with the people at Bespoke. Once you…

You must be logged in to leave a reply.