STEINWAY & SONS MODEL A LOUDSPEAKER WITH AMT TWEETER

The new Steinway & Sons Model A loudspeaker is a loudspeaker specifically designed for room-friendly placement against a wall.

The company’s own Air Motion Transformer tweeter, dedicated 6.5” midrange driver, and two large 12” woofers fit into a shallow closed-cabinet construction.

Steinway & Sons Model A Loudspeaker

STEINWAY & SONS PIANOS

The distinctive design with black piano finish, black strings, and matte gold details resemble the famous Steinway & Sons pianos. Each loudspeaker is assembled and finished by hand in Denmark. The Model A loudspeaker comes as standard in matte black with high gloss black side panels and matte gold details and can be customized with polished gold details as well as other lacquers and finishes, on request by special order.

Steinway & Sons Model A Loudspeaker drivers

ROOMPERFECT

Model A has been designed with the Steinway & Sons A1 or A2 digital power amplifiers as an integral part of the system, with the Steinway & Sons stereo or surround processors performing the active crossover in the digital domain. Additionally, the processor’s RoomPerfect™ technology will adapt the Model A to the room acoustics.

AIR MOTION TRANSFORMER TWEETER

The Model A uses the company’s own Air Motion Transformer tweeter with an ultra-thin, folded Kapton diaphragm between extremely powerful neodymium magnets. The tweeter is embedded in a solid, gold-plated base and complimented by lacquered side panels and acoustically transparent strings.

The Steinway & Sons Model A AMT tweeter

WOOFERS

The two woofer cones combined add up to a very large sound-radiating surface, capable of reproducing deep bass, even below 25 Hz. Large, vented magnets with copper rings and four-layer voice coils provide low distortion, low compression, and high power handling.

The Steinway & Sons Model A Loudspeaker fit up against the wall thanks to their design and room correction technology

STEINWAY & SONS MODEL A SPECIFICATIONS

Description: Full-range in-room loudspeaker

Tweeter: Air Motion Transformer, Kapton foil, Neodymium magnet

Midrange: 165mm / 6,5”, anodized aluminium cone, vented magnet with copper clad pole piece, 35mm / 1,4” two-layer voice coil, moulded aluminium basket

Woofer: Two 30 cm / 12”, anodized aluminium cone, vented double magnet with copper ring, 75mm / 3” four-layer voice coil, moulded aluminium basket

Enclosure: Closed cabinet, aluminium and MDF, steel base

Frequency range: 25 – 22,000 Hz (-3 dB)

Amplification: A1 or A2 Amplifier, 2 x 400 watt per loudspeaker

Amplification channels: 2 per loudspeaker

Max SPL@1m: 114 dB

Crossover: Woofer/Midrange: Digital crossover stored in processor, 200 Hz. Midrange/Tweeter: Passive crossover, 2200Hz

Connections: Neutrik speakON

Placement: Floor-standing, against the wall

Dimensions (W x H x D): 500 x 1150 x 270 mm / 19,7 x 45,3 x 10,6 inches (incl. base plinth)

Weight: 76 kg / 168 lb

Finish: Black piano finish, custom finishes available

PRICING

TBC

HiFi Pig Says: An elegant looking loudspeaker that promises to make room placement easy.

Get all the latest Hifi News with Hifi Pig here!