TAGA Harmony today unveils a new addition to the TCW series in the Custom Installations category: TCW-500R v.4 in-ceiling speaker.

This is the 4th upgraded edition of one of the most popular speaker in the series.tagaa

TAGA Harmony TCW speaker utilizes A very stiff and strong injection-molded polymer chassis, which aim to minimize distortion, vibrations or resonances and have specialized mounting brackets that make installation very easy.

All speakers are designed to be used both in music and home theatre systems in any area of home or in commercial applications.tagab

“The sound of the new edition was significantly improved now it is more clear, natural, dynamic and provides wider dispersion throughout a listening area” says the company’s recent press release.

 

Specifications

Design: 2-way
TEI mounting bracket
TIMPC enclosure
TEC binding posts
High-Frequency Driver: 19 mm (0.75”) Silk dome, Swivel
Bass/Midrange Driver: 165 mm (6.5”) Kevlar®
Maximum Power: 100W
Frequency Response: 30Hz – 20kHz
Impedance: 8ohm
Dimensions: 23.5 x 8.9 cm

The company has also announced 2 new speakers in the Garden series: the TRS-30SM v.2 and TRS-20 v.3.

Garden series speakers are designed for installation in places such as gardens, patios, terraces and outdoor open space.

Stone-like natural shapes of cabinets look very realistic and blend into any outdoor environment.tagac

Key features:

  • Waterproof and UV resistant cabinets covered with extremely durable protective paint;
  • Exceptionally rigid fiberglass cabinets for protection and best sound performance;
  • Reinforced metal grills shaped to facilitate sound dispersion;
  • Corrosion resistant accessories;
  • Strengthened polypropylene cone woofer suspended on weather-resistant rubber surround.

TRS-30SM v.2 only:

  • Dual voice coil construction supports 2 channels (L/R) to deliver pure, high power stereo output from a single speaker;
  • 2 PEI tweeters are mounted far from each other on either ends of the cabinet and they are slightly facing outside what strengthens stereo imaging and sound dispersion.
Model: TRS-30SM v.2  TRS-20 v.3
Design: Stereo/Mono,

Waterproof fiberglass sealed cabinet with metal grill

Mono,

Waterproof fiberglass sealed cabinet with metal grill

High-Frequency Driver: 2 x 19 mm (0.75”) PEI Dome 25 mm (1”) PEI Dome
Bass / Midrange Driver: 203 mm (8”) Polypropylene Cone 203 mm (8”) Polypropylene Cone
Maximum Power: 200W 200W
Frequency Response: 30Hz – 20kHz 30Hz – 20kHz
Impedance: 8ohm 8ohm
Sensitivity: 88dB 88dB
Dimensions (H x W x D): 32.5 x 38 x 49 cm 29 x 34 x 38 cm
Weight: 7 kg / pc 5.8 kg / pc
Finish: Granite

Sandstone

White Granite

Sandstone

Sponsorship button

Read More Posts Like This

  • Monolit-Speakers Concrete Loudspeakers

    Swedish manufacturer Monolit-Speakers make some interesting looking loudspeakers…made out of concrete. Their latest loudspeaker based loosely on the Visaton Solo 50 but in that concrete housing is their first floorstander and comes with crossover components, cables and terminals supplied by Mundorf. The whole loudspeakers measures 972cm x 282 x 352 and weighs in at 75kg standing on FPH dampers which…

  • Taga Harmony have added new models to their Platinum V3 range. The Platinum C-100 v.3 and Platinum S-100 v.3, plus the Platinum SW-10 v.3 is a 10” single driver subwoofer, with built-in high-current amplifier and utilising slotted bass port on the rear. The range has several improvements such as  2nd generation TPTTD-I high-frequency drivers (Taga Pure Titanium Tweeter Dome), 2nd…

  • TAGA Harmony have launched their newest series of in-ceiling active speakers with the first model in the line, the RB-1650BT. The RB-1650BT is a 2 x 30W RMS active speaker paired with a passive one. It allows an audio installation where you can stream music wirelessly via Bluetooth® (music and the Internet radio) or wired via the additional stereo line input…

You must be logged in to leave a reply.