Scansonic MB-B Line Speakers In Walnut Veneer

totaldac sponSCANSONIC MB-B LINE SPEAKERS NOW IN WALNUT VENEER

Scansonic MB-B line of loudspeakers is now available in a real walnut veneer.

For more about the Scansonic MB-B range, read the story we published on the launch, in January 2019.

Two of the speakers from the range are the MB1 B standmount and the MB5 B floorstander.

Scansonic MB-B Line Speakers In Walnut Veneer
Scansonic MB1 B standmount in real Walnut veneer

SCANSONIC MB1 B

The Scansonic MB1 B is a stand-mount, two-way mini-monitor. The reflex port is placed in the front, and it uses special inlays that reduce noise to an extremely low level. The front-porting to allow for placement near the rear wall.

Size: (WxHxD) 178 x 312 x 286 mm

Weight: 6,1 kg

Freq. response: 45 Hz – 40.000 Hz

Impedance: > 8 ohm

Sensitivity: 86 dB

Crossover: 2600 Hz / Minimum phase

Enclosure: Curved, heavily braced, ventilated box design with front loaded port

Drive units: 1 x Ribbon tweeter · 1 x 4.5″ Mid/Woofer

Finish: Black-silk, White-silk or Walnut veneer

Amplification recommended>50W

SCANSONIC MB5 B

The Scansonic MB5 B is a slim floor stander with four 4.5” carbon-coned drivers and a sealed ribbon tweeter. The 5 works as a 2.5-way speaker design, where two 4.5” carbon coned midrange-woofers are supported by two additional Carbon coned drivers for additional base performance. The two carbon midrange-woofers are run in series for increased power handling

Scansonic MB-B Line Speakers In Walnut Veneer
Scansonic MB5 B floorstander in Walnut

Size: (WxHxD) 178 x 1185 x 319 mm

Weight: 24 kg

Freq. response: 29 Hz – 40.000 Hz

Impedance: > 4 ohm

Sensitivity: 90 dB

Crossover: 250 Hz + 2600 Hz / Minimum phase

Enclosure: Curved, heavily braced, ventilated box design with adjustable aluminium feet

Drive units: 1 x Ribbon tweeter · 1 x 4.5″ Midrange · 3 x 4.5″ Woofer

Finish: Black-silk, White-silk or Walnut veneer

Amplification recommended >50W

Scansonic MB-B Line Speakers In Walnut Veneer
Scansonic MB5 B

SCANSONIC MB-B LINE PRICES

Scansonic MB1B Black or White 2.150 € pair

Scansonic MB1B Walnut matt 2.750 € pair

Scansonic MB2.5B Black or White 3.250 € pair

Scansonic MB2.5B Walnut matt 4.200 € pair

Scansonic MB3.5B Black or White 5.000 € pair

Scansonic MB3.5B Walnut matt 6.200 € pair

Scansonic MB5B Black or White 7.000 € pair

Scansonic MB5B Walnut matt 8.900 € pair

Scansonic MB6B Black or White 10.000 € pair

Scansonic MB6B Walnut matt 11.500 € pair

Scansonic MB-B Center Black or White 1.550 € each

Scansonic MB-B Center Walnut matt 2.000 € each

HiFi Pig Says: The Dantax family, which includes Raidho, Scansonic and GamuT, are known for their very high-end loudspeakers, these are at the more affordable end and it is good to see them offered in this new finish.

Totaldac

Get all the latest Hifi News with Hifi Pig here! 

Next / Previous

Latest posts

Interview – Guillaume Boyer of Boyer Audio April 10, 2026 Paradigm Premier Series V2 Loudspeakers hifi news Paradigm Premier Series V2 Loudspeakers April 10, 2026 ZMF Caldera Closed Headphones April 10, 2026 Grado Labs Cartridge Lineup Evolution hifi news Grado Labs Cartridge Lineup Evolution April 9, 2026