TAGA Harmony HTA-800 is a 50W / 8ohm hybrid integrated amplifier utilising two 6N3 tubes in the preamp section and four Toshiba transistors at the output. High-performance tubes and a high-power shielded toroidal 200W transformer provides stable power.

There are audiophile grade ALPS volume potentiometer, WIMA capacitors and gold-plated speaker terminals. Analog inputs with solid machined brass RCA sockets can accommodate up to 4 stereo devices including a turntable (MM cartridge). You can connect a range of  digital devices via optical or coaxial inputs and there is a built-in 24bit / 192kHz DAC , it also has a headphone preamplifier. A Preamplifier output is dedicated for an optional external power amplifier or powered subwoofer and speakers.

Power Output:          2 x 60W RMS / 4ohm

2 x 55W RMS / 6ohm

2 x 50W RMS / 8ohm

Class A/B

Vacuum Tubes:        2 x 6N3

THD:   0.5%

Signal/Noise ratio:  75dB

Frequency Response:        20Hz – 20kHz

Inputs:            Analog: RCA Stereo: CD, Line, AUX, Phono (MM)

Digital: Optical, Coaxial

Outputs:         RCA Pre-Out

Headphones: Impedance 16Ω, Output Power 150mW

Phono input:

Input impedance 47KOhms/120pF

Gain 40dB

Input voltage 5mV @ 1kHz

THD <0.5%

SNR 72dB

Built-in DAC: 24bit / 192kHz

Cirrus Logic CS4344

Included Accessories:         Aluminium Remote Controller

IEC Power cord

AC Power, Power Consumption:  220-230V 50/60Hz, 200W

Dimensions (H x W x D):    14.2 x 43 x 38 cm

Weight (net): 8.1  kg / pc.

Finishes:       Black


You must be logged in to leave a reply.

Real Time Web Analytics